Scotts standard spreader settings lbs per 1000 sq ft

Spreader settings are intended as a guide and unit calibration should still be performed to ensure proper application rates. These suggested settings are estimations based on past experience and testing. Some typical settings for seeding Scotts Classic Heat and Drought grass seed in a Scotts rotary type or broadcast type spreader are 11.5 for reseeding and 14 for a new lawn or to repair bare spots. Many variables such as walking speed, terrain, particle size, density, and spreader condition can affect these settings. For the product below, the application rate is 11.5 lbs/5000 square feet. Individual spreader settings will vary but common settings are listed below. Apply using a Scotts broadcast, rotary, drop, or Wizz spreader. Put 65lbs of Milorganite in your spreader this should cover 500 sq ft. Please have the product name, your spreader make and.

They are not intended to replace calibration.ДISCLAIMER: These spreader settings were established using standard equipment available from the spreader manufacturer at swath widths and speeds typically used within the industry. The Scott's standard broadcast spreader setting is based on the number of pounds per 1000 square feet. Scotts spreader settings lbs per 1000 sq ft grass seed. 1 - 12: 2: 3.5: 4: 1 - 20: 4: 5: 6: 1 - 30: 13: 15: 17: If you require additional assistance, our customer service representatives will be happy to assist you during normal business hours. Spreader settings are intended as a guide and unit calibration should still be performed to ensure proper application rates. Generic Settings for Drop Spreaders Spreader dial range 3 lbs/1,000 sq. DISCLAIMER: These spreader settings were established using standard equipment available from the spreader manufacturer at swath widths and speeds typically used within the industry.

Scotts standard spreader settings lbs per 1000 sq ft